A magnifying glass and lamp manufacturer uses hook and loop products to fasten components to their glass housings. These magnifying lamps are used to perform intricate work on electronics as well as in medical lab testing. The lamps even used to assist reading and drawing. The acrylic adhesive is good in this application since the lamps can produce heat within the housing that may affect the performance of other adhesives. The Hook is cut and mated to 2.25” sets. It gets mated with 3/4” Black Loop PS-72.
Hook and Loop are sold separately - be sure to order BOTH sides if needed.
The Acrylic Adhesive works best on substrates such as: Aluminum, Stainless Steel, Painted Metal, Glass, and Rigid Plastics. Ideal for Automotive or Marine applications. Surface must be cleaned, preferably with a solvent, and dry before bonding. For best results, bonding is recommended at room temperature, 60 F to 75 F Applications: Industrial sectors
This Adhesive has:
Moderate Tack
Medium Setting
Achieves full bond strength in 24 hours
Operating Temperature Range: -20 degree F to 225 degree F