We're More Than Just Products!
We are a full service Hook & Loop conversion facility. Let us handle the hard work for you.
VELCRO® Brand - 1" White Loop: Pressure Sensitive Adhesive - Rubber
In stock
Part Number
185231
Volume Discount Discount will be automatically applied at checkout.
- SAVE 10%
- SAVE 20%
- SAVE 25%
The Rubber Adhesive works best on substrates such as: Aluminum, Stainless Steel, Painted Metal, Glass, Rigid Plastics, and Drywall.
This Adhesive has:High Tack Quick Setting Achieves 80% bond strength in 1 hour (full strength in 24 hours)
Surface must be cleaned, preferably with a solvent, and dry before bonding. For best results, bonding is recommended at room temperature, 60 F to 75 F.
This Adhesive has:
Surface must be cleaned, preferably with a solvent, and dry before bonding. For best results, bonding is recommended at room temperature, 60 F to 75 F.
| Part Number | 185231 |
|---|---|
| Color | White |
| Adhesive | Rubber |
| Brand | VELCRO® |
| Sold In Quantity | Sold On 25 Yard Rolls (900 Inches) |
| Hook or Loop? | Loop |
| Color | White |
| Width | 1" |
| Product Type | Adhesive Backed |
Write Your Own Review
What is hook and loop? 
Hook and loop is a two component fastener popularized by the VELCRO® Brand. The hook is the rough, scratchy side and the loop is the soft, fuzzy side.
What size are the rolls? 
Most of the rolls we sell are 25 yards long. Some products are sold on 50 yard rolls, like some low profile hook products and 3/8" and 1/2" sew on. Some products are sold on 100 yard rolls, like the polypropylene webbing. And some products are sold by the yard, like the wide loop. You can find the roll size on the product page above the attributes or above the pricing.
Which adhesive is right for me? 
We offer two kinds of pressure sensitive adhesives. A rubber based adhesive, and an acrylic based adhesive. For these adhesives, you simply peel off the release liner and stick the adhesive into place. The rubber adhesive is a high tack adhesive that bonds well to a wide variety of substrates including rough and uneven surfaces. Some examples include plastic, drywall, wood, metal, and glass. This adhesive is a good all-around adhesive, but it doesn't hold up as well to moisture and chemical use. It's operating temperature is good up to 120-190F, depending on the brand. The acrylic adhesive is a medium tack adhesive that bonds well to smooth surfaces like glass, stainless steel and aluminum. It also bonds well to certain plastics. This adhesive holds up better to moisture and chemicals and has a wider operating temperature range, good up to 225-240F, depending on the brand. Which Adhesive Should I Use?
