DuraGrip® Brand Electrically Conductive Hook and Loop

In stock
Only %1 left
Part Number
DEC-DG20ELCL
DuraGrip® Brand electrically conductive hook and loop tape is coated in liquid silver to optimize conductivity. With resistivity of 1.8 Ohms per square inch for the hook side and 1.4 Ohms per square inch for the loop side, this product produces 0.8 Ohms of resistivity during closure (when the hook and loop are mated together) and is great for anti-static applications, such as clean room environments or electronic assembly plants, where workers may be tethered in order to ground them. The military also has use for electrically conductive hook and loop tape, using it to shield tents and other equipment from outside radio frequencies. There is a 10 yard minimum order for this product as the hook and loop are dipped to order to avoid tarnish. Ideal for RF/EMI shielding and grounding straps. Lifespan of around 5,000 cycles.
Hook and Loop are sold separately - be sure to order BOTH sides if needed.

Choose Your Products:

* Required field
Length
Sold By The Yard, 10 Yard Minimum, Up To 7 Day Lead Time

Reset Selections

Want to try before you buy?
$54.12-$87.57


Fast Shipping

Fast Shipping

Easy Return

Easy Return

Over 9999 Products Sold

Over 1,000 Products Sold

DuraGrip® Brand electrically conductive hook and loop tape is coated in liquid silver to optimize conductivity. With resistivity of 1.4 Ohms per square inch, this product produces 0.8 Ohms of resistivity during closure (when mated with Hook) and is great for anti-static applications, such as clean room environments or electronic assembly plants, where workers may be tethered in order to ground them. The military also has use for electrically conductive hook and loop tape, using it to shield tents and other equipment from outside radio frequencies.

This material is manufactured at 16mm, 30mm, and 50mm widths, which aligns most closely with the 5/8", 1", and 2" widths. The 1" option may measure closer to 1 3/16".

  • Sold by the yard, 10 yard minimum
  • Silver coating produces 0.8 Ohms resistivity during closure
  • Ideal for RF/EMI shielding and grounding straps
  • Life of around 5,000 cycles
    More Information
    Part Number DEC-DG20ELCL
    Color Silver
    Sold In Quantity Sold By The Yard, 10 Yard Minimum, Up To 7 Day Lead Time
    Width 5/8", 1", 2"
    Write Your Own Review
    You're reviewing:DuraGrip® Brand Electrically Conductive Hook and Loop
    Your Rating
    What is hook and loop?
    Hook and loop is a two component fastener popularized by the VELCRO® Brand. The hook is the rough, scratchy side and the loop is the soft, fuzzy side.
    What size are the rolls?
    Most of the rolls we sell are 25 yards long. Some products are sold on 50 yard rolls, like some low profile hook products and 3/8" and 1/2" sew on. Some products are sold on 100 yard rolls, like the polypropylene webbing. And some products are sold by the yard, like the wide loop. You can find the roll size on the product page above the attributes or above the pricing.
    ^Top
    ×

    Order a free sample at no cost.*

    * Required field